SWASTIK PIPE LTD uses the Electric Resistance Welding process to manufacture pipes and tubes ranging in nominal diameter from 15mm (1/2 inch) to 300mm (12 inches) and in wall thickness from 2.00mm to 10.00mm.

Tubes are manufactured from edge trimmed Mild Steel Strips Slitted from Hot Rolled low Carbon Steel Coil conforming to IS: 10748-1995. These edge trimmed strips are mechanically formed into required circular shape and high frequency electricity, i.e., 4,50,000 cycles/second is then used to fuse the pipe together to from a weld joint thus become homogeneous part of the completed tube. The tubes then passes through the sizing section where dimensional tolerance if any are corrected, where after they are cut to length and ends beveled before hydrostatic testing.

Thereafter they are sent for protective surface finishing operation such as Hot Dipped Galvanising or Varnishing as per specific requirements. The tubes are offered beveled, plain ended or threaded with screwed & socketed.

SWASTIK PIPE LTD uses the Electric Resistance Welding process to manufacture pipes and tubes ranging in nominal diameter from 15mm (1/2 inch) to 300mm (12 inches) and in wall thickness from 2.00mm to 10.00mm.

Tubes are manufactured from edge trimmed Mild Steel Strips Slitted from Hot Rolled low Carbon Steel Coil conforming to IS: 10748-1995. These edge trimmed strips are mechanically formed into required circular shape and high frequency electricity, i.e., 4,50,000 cycles/second is then used to fuse the pipe together to from a weld joint thus become homogeneous part of the completed tube. The tubes then passes through the sizing section where dimensional tolerance if any are corrected, where after they are cut to length and ends beveled before hydrostatic testing.

Thereafter they are sent for protective surface finishing operation such as Hot Dipped Galvanising or Varnishing as per specific requirements. The tubes are offered beveled, plain ended or threaded with screwed & socketed

We manufacture and export Hollow Steel Sections – Square Hollow Sections (SHS) and Rectangular Hollow Sections (RHS) for structural use as per IS: 4923 as per customer’s requirement. These sections are available with anti rust oil coating from inside & outside to ensure safe delivery to end customers.

We manufacture and export hollow sections, structural hollow sections, hollow steel sections, square /rectangular hollow sections, round hollow sections, mild steel black ERW square tubes, rectangular tubes & round hollow section tubes and hot rolled steel sections as per customer’s requirement. These sections are available with anti rust oil coating from inside & outside to ensure safe delivery to end customers.

Tubes are manufactured from edge trimmed Mild Steel Strips Slitted from Hot Rolled low Carbon Steel Coil conforming to IS: 10748-1995. These edge trimmed strips are mechanically formed into required circular shape and high frequency electricity, i.e., 4,50,000 cycles/second is then used to fuse the pipe together to from a weld joint thus become homogeneous part of the completed tube. The tubes then passes through the sizing section where dimensional tolerance if any are corrected, where after they are cut to length and ends beveled before hydrostatic testing.

Thereafter they are sent for protective surface finishing operation such as Hot Dipped Galvanising or Varnishing as per specific requirements. The tubes are offered beveled, plain ended or threaded with screwed & socketed

We are manufacturing Steel Tubular Poles Conforming to IS: 2713 or equivalent International specifications as per customers requirements.

Customers can be confident that only the finest quality of Steel from Steel Authority of India (SAIL) goes into the production of T.T Swastik pipe in our own plant which is raw-material for best quality poles. This also ensures uninterrupted execution of orders of our valued customers.

We exercise stringent quality control testing with latest facility right from selection of raw-materials to the finished products. It has become a symbol of excellence and first choice for those who never compromise with the quality and strength more…

On line stringent quality checks ensure the tolerances and dimension for sophisticated applications

CR production plant consists of two 4 HI and one 6 HI cold rolling mills along with bell furnaces, Skin Pass, Slitting, cut to length and testing facilities.
Products Range
CRCA strips with low carbon
Medium carbon steel
High strength low alloy steel
Semi processed unalloyed electrical
Hot rolled oiled & picketed steel

Solar power production is an ever growing industry in India and considering the demand for new power resources of energy increasing with the growing population, Swastik Pipe Ltd. has providing solar structure service with (Design , Manufacturing & Supply. All products are thoroughly inspected for quality check during every step of production as per specification & approved Drawing.